English
Español
日本
한국
Pусский
العربية
 |
|
The Plastic Intalox Saddle is made from heat resistant and chemical corrosion resistant plastics, including polypropylene (PP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF). It has features such as large void space, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on, and the application temperature in media ranges from 60 to 280℃. For these reasons it is widely used in the packing towers in petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection, etc. Plastic Intalox Saddle is a combination of the ring and the saddle, which benefits the advantages of the two. This structure helps liquid distribution and enlarges the...
 |
|
The shape of the Intalox Saddle Ring is a combination of the ring and the saddle, which benefits the advantages of the two. This structure helps liquid distribution and enlarges the quantities of gas holes. The Intalox Saddle Ring has less resistance, bigger flux and higher efficiency than the Pall Ring. It is one of the most widely used packing with good hardness. It has low pressure, big flux and high efficiency of mass transfer, and it is easy to manipulate. Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinyiidene fluoride (PVDF) and Polytetrafluoroethylene (PTFE). The temperature in media ranges from 60 Degree C to 280 Degree C...
 |
|
Plastic Pall Ring packing is a high hole diameter equal to the packing ring, each window there are five tongue leaves, each leaf tongue ring in turn point to heart, upper and lower levels of the location of the opposite window at different times and in general Central area of wall openings about the total area of about 30%. With porosity, and pressure drop and low height of mass transfer unit, the pan-point high, vapor-liquid contact with the full, the proportion of small, high mass transfer efficiency. This structure improves the vapor-liquid distribution, make full use of the inner surface of the ring, so that the tower fill the gas and liquid form from the free passage. Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced...
 |
|
Before the invention of the tower packing shape by Frederick Raschig in 1914, Plastic raschig ring is the most early-developed product in random packing. It has a simple shape with equal length at its diameter and height. It provide a large surface area within the volume of the column for interaction between liquid and gas or vapour. Packed columns were filled with quartz, broken glass bottles, broken pieces of pottery, or coke. Operating data obtained from one tower could not be used in a second tower as the packing material was not consistent. The invention of the Raschig Ring gave the packed column consistency and dependability. Raschig Rings significantly improved the operating characteristics of the column, enabling the performance of the packed column to be duplicated in a second column of equal size...
 |
|
Plastic Heilex Ring is a new type of injection molding of the filler hole, it was first being developed in foreign countries out of. Later, China's such a filler were studied, and the successful development of China-made Heilex ring packing. Plastic Heilex Ring shape so that it not only has the flux, and pressure reduction and anti-corrosion resistance and good impact performance, but also has a filler would not nested, the wall flow effect of the small and the advantages of gas-liquid distribution. This applies to gas absorption packing, cooling and gas purification processes.It is a new kind of open-celled packing. Heilex ring has unique configuration, and usually made by PP injection. Plastic heilex ring enlarges its surface area and void space which contribute a lot to enhance the product performance. We can provide...
 |
|
Plastic Teller Rosette Ring is the first A.J.Teller by the United States in 1954 out of research and development, and therefore also often referred to as the garland wreath Taylor (Teller Rosette). This filler is composed of many ring formed around the knot, because the department can fill the gap for a higher liquid holdup, the liquid column can stay longer, thus increasing the two-phase gas-liquid contact time, improve the packing efficiency of mass transfer. Polypropylene packing with porosity, and pressure drop and low height of mass transfer unit, the pan-point high, vapor-liquid contact with the full, the proportion of small, high efficiency and mass are used for gas scrubbing, purifying tower. Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE)...
 |
|
Kelley Tri-pak tower random packing, which is similar as polyhedral hollow ball packing, provides maximum surface contact between the gas and the scrubbing liquid by facilitating continous formation of droplets througout the packed bed. This result in high scrubbing efficiency, and minimizes total packing depth required. It can also prevent clogging, because there are no flat surface to harbor particulates. Tri-pak tower packing eliminates puddling too. Because its free of corners and valleys, and minimizes wasteful liquid flow down the wall surface. Tri-pak further prevent dry spots and compression interlock, two phenomena common to traditional packing media. Both conditions cause liquid and air channelling and decrease media efficiency.
 |
|
Polyhedral Hollow Ball packing is made from heat resistant and chemical corrosion resistant plastics, and the application temperature in media ranges from 60 to 150 degrees. Plastic Polyhedral Hollow Ball (PP, PE, PVC, CPVC, RPP ) is also called plastic multi-aspect hollow ball, polyhedral hollow ball packing composed of two hemispheres which will form into a ball. And each hemisphere consists of a number of half fan-shaped leaves, the upper and lower leaves in a staggered arrangement. The design concept is advanced and the structure is reasonable. Plastic Polyhedral hollow balls have the virtue of light weight, wide free space, small wind resistance, and good surface hydrophilic, big full wet surface area and convenient filling in the equipment and sound usage effect...
 |
|
Plastic Hollow Floating Ball help control heat loss, evaporation, and help with odor and mist control. Hollow Balls are also used as a check-valve ball in flow control applications. Plastic Hollow Floating Ball is made from heat resistant and chemical corrosion resistant plastics. It has features such as high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on, and the application temperature in media ranges from 60 to 150. For these reasons it is widely used in the packing towers in petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection, etc. Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE)...
 |
|
Plastic Beta Ring is made from heat resistant and chemical corrosion resistant plastics, including polypropylene (PP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF). It has features such as large void space, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on, and the application temperature in media ranges from 60 to 280℃. For these reasons it is widely used in the packing towers in petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection, etc. Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE)...
 |
|
Plastic Ralu Ring is an improved pall ring, their open structure ensures a regular flow through the packed bed resulting in a minimal pressure drop. Plastic ralu rings are made of heat resistant and chemical corrosion resistant plastics including PP, PE, RPP, PVC, CPVC and PVDF. Plastic Ralu Rings are featured with high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on, and the application temperature in media ranges from 60°C to 280°C. It is widely apply in all kinds of separation, absorption and desorption device, atmospheric and vacuum distillation device, decarburization and desulfurization system, ethylbenzene, iso-octane and toluene separation.
 |
|
The characteristics of plastic VSP-pak ring have large void rate, low pressure drop and low height of mass transfer unit, high extensive point, full contact of gas and liquid, low specific weight and high mass transfer efficiency. It is widely used in the packing towers, petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection and etc. It is widely apply in all kinds of separation, absorption and desorption device, atmospheric and vacuum distillation device, decarburization and desulfurization system, ethylbenzene, iso-octane and toluene separation. Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP)..
 |
|
Plastic Cascade Mini Ring is made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF). Plastic Cascade Mini Ring: It was developed by British Company MTL Ltd, which also called CMR. It has not only change traditonal equal length and diameter, but also cone-shaped flanging at one edge. This special structure has shorten distance which gas passing through wall's out surface, but also reduced the resistance when air passing through bed layer and increased voidage. Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE)...
 |
|
Plastic pentagon packing is an excellent packing. Based on this product's structure analysis, funnelled hollow out design speeds up liquid's velocity so as to improve Gas & liquid separation efficiency. Ring wall's large area opening hole overcomes big area blocking. Five pieces of horizontal bar which bend toward the centers forms more bigger surface for gas & liquid's contacting. More obviously feature is five pieces of down warded rods evenly distribution. This distribution will promote liquid drop to form big droplet. Finally, it is recognized high efficiency random packing used in separation. Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinyiidene fluoride (PVDF) and Polytetrafluoroethylene (PTFE). The temperature...
 |
|
Plastic Hiflow ring is a 3rd generation high performance tower packing which provides an optimal design of high mechanical stability, void fraction and superior mass transfer performance. The grid structure guarantees its opening pore ratio exceed 50% and bed void fraction is higher than same size's pall ring. In addition, large fluid flux guarantee its pressure drop per square meter lower 45% than pall ring. Vertical bar staggered distribution and reinforced horizonal stripe largely improve its rigidity and strength. It has features such as high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on. Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene...
 |
|
Plastic super raschig ring is one kind of random packing design by KELLEY'S research and development team, it with large surface area, and high free volume, low pressure drop, low mass-transfer unit height, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on. It's the development packing design based on plastic raschig ring and pall ring. Plastic Super Raschig Ringis made from heat resistant and chemical corrosion resistant plastics, including polypropylene (PP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF). It has features such as large void space, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on, and the...
 |
|
Plastic Flat ring has a small ratio of height to diameter, about 1:3. Due to its structure's change, effectively reducing the filler layer axial back mixing so as to improve the liquid-liquid mass transfer efficiency between two phases. Moreover, it is suitable for such packing liquid-liquid mass transfer of the extraction process. The Flat ring packing is similar to ring of the Cascade Mini Ring on the structure, but there are no top turn ups, guarantee packing unify orientation when piling up, increase pile density, make packing layer liquid distribute further more even improved inside separate. Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride...
 |
|
Plastic snowflake ring is made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF). It has features such as high free volume, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on, and the application temperature in media ranges from 60 to 150. Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene (PE), polypropylene (PP), reinforced polypropylene (RPP), polyvinyl chloride (PVC), chlorinated polyvinyl chloride (CPVC), polyvinyiidene fluoride (PVDF) and Polytetrafluoroethylene (PTFE). The temperature in media ranges from 60 Degree C to 280 Degree C...
 |
|
Q-pack's large pore volumes and surface areas make it an ideal media for biological treatment of drinking water. Bio film processes are excellent for treating raw water containing ammonia, manganese, iron etc. In conventional filtration processes Q-pack can be used in different ways. In dual media filters Q-pack can be used in combination with sand. Tests have shown that Q-pack operates as well as or better than traditional filter media in these types of filters. Q-pack can not only be used in traditional drinking water treatment, but also in treatment of saline water. In desalination plants one of the most important parts is the pre-treatment process. Q-pack is an excellent filter media for use in pre-treatment filters in desalination plants. Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics...
 |
|
Material: PE or HDPE. Size: 10x7, 10x10, 11x7, 12x7, 12x10, 12x12, 14.5x10, 25x12mm. Moving Bed Bio film Reactor (MBBR) technology employs thousands of polyethylene bio film carriers operating in mixed motion within an aerated waste water treatment basin. Each individual bio carrier increases productivity through providing protected surface area to support the growth of heterotrophic and autotrophic bacteria within its cells. It is this high-density population of bacteria that achieves high-rate bio degradation within the system, while also offering process reliability and ease of operation. MBBR processes are applied to common waste water including: 1. BOD Reduction. 2. Nitrification. 3. Total Nitrogen Removal. Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including...
 |
|
Plastic Igel ball is a normal biological filter, its excellent performance and long-term improvement. Our igel ball is made of plastic, so it have light weight and can float on the water, the shape is ball. Its characterized by small water resistance, good ventilation, most of igel ball have diversion design, such as deflector, diversion channel, the water can be evenly distributed meanwhile increased water flow. It's better to gas exchange, can increase dissolved oxygen content and remove H2S and CO2. It is be used in pond and aquarium. Adopting environmental plastic material with many specifications. All bio balls have wide surfaces for nitrifying bacteria to grow. It can help to establish the most complete and balanced system for biological filtration and can be used in both fresh and marine water...
 |
|
1. Our Lanpacks have achieves the impossible: significantly lower pressure drop and higher transfer efficiencies than other smaller packings. 2. Our Lanpacks has a track record of superior performance in the field. It comes in two sizes: 2.3 inches and 3.5 inches, KELLEY have a variety of plastic materials inchluding polypropylene, polyethylene, PVDF, etc. 3. It's the best parts in tower packing for application with high liquid loading. such as: 1). Ground water remediation by air stripping. 2). Aeration of water for H2S removal. 3). CO2 removal for corrosion control. 4). Scrubbers with high liquid flux (less than 10 gpm/ft2). Material: Our Factory assure all tower packing made from 100% Virgin Material. Shipment for Products: 1. OCEAN SHIPPING for large volume. 2. AIR or EXPRESS TRANSPORT for sample request...
 |
|
Plastic Conjugated Ring is made from heat resistant and chemical corrosion resistant plastics, including polypropylene (PP), polyvinyl chloride (PVC), chloridized polyvinyl chloride (CPVC) and polyvinylidene fluoride (PVDF). It has features such as large void space, low pressure drop, low mass-transfer unit height, high flooding point, uniform gas-liquid contact, small specific gravity, high mass transfer efficiency and so on, and the application temperature in media ranges from 60 to 280℃. For these reasons it is widely used in the packing towers in petroleum industry, chemical industry, alkali-Chloride industry, coal gas industry and environmental protection, etc. Plastic tower packing can be made from heat resistant and chemical corrosion resistant plastics, including polyethylene...
 |
|
PTFE Pall Ring packing has large flux, small resistance, high separation efficiency and operational flexibility.
Shipment for Products:
1. OCEAN SHIPPING for large volume.
2. AIR or EXPRESS TRANSPORT for sample request.
Locates in tower packing professional area, Jiangxi province Pingxiang city in China, Kelley is a global partner offering tower packing products and chemical / industrial ceramics for performance-critical applications. Our brand / quality / services add value and strengthen the competitive position of our...
 |
|
PTFE Raschig Ring packing has large flux, small resistance, high separation efficiency and operational flexibility.
Material: Our Factory assure all tower packing made from 100% Virgin Material.
Shipment for Products:
1. OCEAN SHIPPING for large volume.
2. AIR or EXPRESS TRANSPORT for sample request.
Locates in tower packing professional area, Jiangxi province Pingxiang city in China, Kelley is a global partner offering tower packing products and chemical / industrial ceramics for performance-critical applications. Our brand / quality / services add value and strengthen the competitive position of our customers.
 |
|
Plastic Liquid-surface covering ball is characteristic of stable barycenter, super position side by side, and excellent covering performance. This product is widely used in coagulate water tank and salt eliminating water tank in water treatment.
Ways of using:
Put in a certain quantity of the as per the surface area of the water or liquids surface area, and the balls will set out and distribute themselves in an orderly way, and covers the surface area, and seal the fringe with sealing material.
: amory.yao.